50 Micron Poly Spun Sediment Filter Cartridge - 2.5 x 10

Part Number: SDC-25-1050

Retail Price per Filter: $6.99
Our Price:
As Low As
$2.19
Per Filter
In Stock
Select Quantity:

Would you like to have this product automatically shipped to you?

The Hydronix SDC-25-1050 is a 50 Micron Sediment Filter. Removes dust, dirt & sediment. 50-micron filters provide a higher flow rate and less pressure drop than lower micron rated filters.

The Hydronix 10" Sediment Filter Cartridge is made with 100% polypropylene, this sediment cartridge is resistant to chemicals and reduces waterborne contaminants like rust, silt, sediment, and sand. This Hydronix water filter has four layers, outside-in flow and step-by-step 50 microns that effectively retain particles while extending the life with a lower pressure drop.


This sediment filter is widely used as pre-filtration for reverse osmosis systems and post-filtration for granular activated carbon (GAC) filters. Made with 100% polypropylene, this filter is resistant to chemicals and reduces waterborne contaminants like sediment, silt, rust, and sand. The graded density of the Hydronix 10" filter cartridge provides a higher dirt holding capacity over standard spun polypropylene and string wound cartridges. The operating temperature of this cartridge is 40 degrees to 145 degrees Fahrenheit.


 Specifications:


  • 50 micron rating
  • Dimensions: 2 1/2" x 9 7/8"
  • Flow Rate:  0.2 psi @ 5 gpm
  • Certified to NSF standard 42
  • Replace filter every 6 months
  • Fits standard 10" filter housings
  • Do not use microbiologically unsafe water
  • Surfactant free, binder-free, and adhesive-free


Compatible with the following:

  • Aqua-Pure AP-124
  • 3M - AP11T, AP101T, FHT-34-S, USO-14-S
  • Cuno - NPF-50-975
  • Hytrex - 94763
  • LiquiTec - SDF-25-1050
  • Pentek - 155214, HF-360, PD-50-934
  • Purtrex - 93111, 1193111, PX50-9 7/8, PX50-10
  • Watts - 304007

YOU MAY ALSO LIKE
Related Products, Parts & Accessories