Our Price: $2,699.00
MSRP $3,900.00 |
You Save $1,201.00
Waste King 3000 3 Horsepower
Operations With Extremely Heavy Volume of Difficult Food Waste (Steak or RIB Restaurant)
Waste King Exclusives:
Models 3000-3 is equipped with a drain outlet for connection to a conventional 3" trap. The trap may be connected to a 3" branch waste line running directly into a waste stack. We recommend a slope in the waste line of not less than 1/4" per foot. Limit the 3" drain line to a turn free run of 15', then connect to 4" or 6" lone or stack. Connect directly to waste line, not through a grease interceptor.
3000-3 60 cycle 3 Phase 3 HP 1740 RPM 208-220/440 volts 7.0/3.5 amps.
Bearing permanently lubricated. Manual reset overload protection in motor.
The legs can be cut shorter if the unit must be lower than the minimum shown for the screw adjustment. 2" clearance must be maintained beneath the motor for ventilation. For example, on a flat floor the model 3000-3 can be shortened by 1/2".
If space between disposer and wall is insufficient to allow for installation of trap, waste line may have to be at an angle to the wall as shown. See disposer leg modification instructions.
Disposer assembly includes disposer, mountings, and drain outlet. Other items shown in gray are available in mounting systems or ordered separately. Installation should be made in accordance with local codes. All specifications subject to change without notice. Assembly should be installed in accordance with Waste Kings printed installation instructions. ( * Items available through Waste King. )
So that you may be assured of receiving the fine quality you expect when you specify a WASTE KING FOOD WASTE REMOVAL SYSTEM, we include the following sample specification for your convenience: Food waste disposer shall be 3 HP, 60 cycle, 3 Phase with 208-220/440v. There shall be a rubber Hush Cushion between the disposer and the cone or sink to eliminate metal to metal contact. Turntable shall be of stainless steel with jam-resistant swivel impellers of hardened stainless steel with tungsten carbide inserts. Turntable shall have stainless steel cutting blade rotating below the exit slots. Grind ring shall be precision ground on all cutting surfaces and shall have non-wearing, size controlled exit slots. Disposer shall have a totally enclosed, continuous duty, fan cooled motor with integral overload protection. Unit shall be Waste King model 3000-3.
Hours of Operation (CST): 8:00am - 4:30pm Mon-Thur & 8:00am - 3:30pm Fri
Contact us if you need help finding your water filter system or replacement water filters.
Product Index | Category Index | Brand Index