"The 160362 Pentek 160362 Water Filtration System is a standard solution for 3/4"" housing filters, which can be used in various sectors, whether its residential, commercial or industrial applications. It comes with a easy to install mounting bracket kit with with 3/4"" NPT inlet and outlet ports."
This complete filtration system includes the following:
(1) 20" Standard 3/4" Filter Housing
(1) 20" WS20 Water Softening Filter cartridge
(1) Mounting bracket kit
(1) Filter wrench
This Standard Filter Housing is made from durable Styrene-Acrylonitrile (SAN) that is FDA compliant. The Pentek Whole House System is equipped with 3/4" NPT inlet and outlet ports.
Also known as part number 160362
Flow rate: 1 psi @ 10 gpm
Dimensions: 22 3⁄8" x 5 1⁄8"
Optional pressure-relief/bleed button
Molded from rugged reinforced polypropylene
Top-seated Buna-N O-ring for leak-proof sealing
Uses 20" x 2 1/2" WS20 Water Softening Filter Cartridge
Maximum Temperature Capacity: 125 degrees Fahrenheit (51.7 degrees Celsius)
The Pentek WS20 Water Softening Filter Cartridge reduces bad taste and odor in hard water by removing sediment, dirt, rust and other impurities. To ensure maximum performance of your Pentek 160362 Water Filter System, it is recommended that you replace your filter every 3 to 6 months or when you notice a reduction in your water flow rate. An optional pressure-relief button is located on the inlet side to help relieve pressure on the inside of your housing unit when changing your filter. As the temperature approaches the freezing mark, be sure to protect your housing system to prevent filter fractures and water leaks.