Home > Water Filters by Brand > Pentek

Pentek 155100-43 PCC-1 10" Poly Phosphate Crystal Water Filter

Item SKU: 155100-43

MFG ID: PCC-1 | UPC: 688580776678

Read Customer Reviews

Our Price: $79.99

MSRP ~~$89.99~~ | You Save $10.00

Quantity | In Stock

Auto-Ship and Save 5% on this Item?

The Pentek 155100-43 PCC-1 10" Poly Phosphate Crystal Water Filter is recommended for use with ice machines, coffee and vending machines, food service equipment, water heaters, air conditioning equipment and many other types of water processing equipment.

Features:

TPentek PCC-1 Water Filter Cartridges contain food-grade hexametaphosphate crystal.
Pentek PCC-1 water filters contain food-grade hexametaphosphate that dissolves slowly in water to inhibit scale and rust build-up. The water enters from slits on the bottom of the filter cartridge and works its way up the bed.
Recommended for use with ice machines, coffee and vending machines, food service equipment, water heaters, air conditioning equipment and many other types of water processing equipment.
The Pentek PCC-1 filter is effective for treating scale, corrosion and iron problems for up to six months at various flow rates and feed concentrations.
The Pentek PCC-1 filter keeps hardness particles separated so they cannot precipitate and form deposits when heated. Maximum hardness 15 gpg.
Forms a protective coating on all metal surfaces, safeguarding against acidity/alkalinity, hardness, chloride and other factors which effect the corrosion of water equipment and pipes. pH range 6.5 - 9.0.
Keeps dissolved iron, up to 1 ppm, suspended in solution (sequestered), preventing dissolved iron from precipitating, which would cause staining and discoloration.
Note: Eye irritant. Contains sodium calcium hexametaphosphate. Avoid contact with eyes. In case of eye contact, flush with water for 15 minutes, get medical attention. Keep out of reach of children.
Note: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Note: With steamers, the water should be flushed daily.
Note: Do not use this water filter cartridge on water that will be carbonated.

Specifications:

Dimensions: 9-5/8" x 2-7/8" (244 mm x 73 mm)
Initial ?P (psi) @ Flow Rate (gpm): Up to 5 gpm (19 L/min)
Temperature Rating: 40°F to 100°F (4.4° C to 37.8°C)
The phosphate material in the PCC series is rated to 100°F. If the water is above 100°F, the phosphates become more soluble, wasting the material. Also, there is risk of the phosphates melting as one gets further above 100°F.
Maximum Hardness: 15 gpg
pH range: 6.5 - 9.0
Dissolved Iron: Up to 1 ppm
Pentek PCC-1 Phosphate Crystal Water Filter Materials of Construction:
Filter Media: Food Grade Polyphosphate
Shell: Polypropylene
Gasket: Buna-N

Question & Answers

Q Will this fit a Sears "Multi-Purpose Cartridge Filer Housing'?

A According to Pentek, the PCC-1 cartridge is designed to fit in #10 Standard filter housings only. It will depend on which "Multi-Purpose Cartridge Filter Housing" you have on whether it will work or not.

Q Why did you choose this?