0 item(s) - Total: $0.00

Omnipure POB934 10 100% Poly Phosphate Cartridge

Omnipure POB934 10 100% Poly Phosphate Cartridge

Item SKU: POB934

MFG ID: POB934
UPC:





Omnipure POB934 10" 100% Poly Phosphate Cartridge

General Installation/Operation/Maintenance Requirement:

  • Note flow direction of filter.
  • For quick connect fittings, push scratch free tube end into the fitting until it bottoms. Threaded fittings must be wrapped with Teflon™ tape before installation. Install Teflon™ taped fittings and tighten firm. Use two wrenches to firmly tighten tubing.
  • Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
  • Replace cartridge when rated capacity (6 months) is reached, or when flow becomes too slow.
  • Install in compliance with state and local laws and regulations.

Specifications:

  • Capacity: 6 Months
  • Flow Rate: 1 - 2.5 GPM (3.78 LPM)
  • Maximum Pressure: 125 PSIG
  • Temperature: 35-100o F (2-38o C)
Related Products, Parts & Accessories
OmniPure OCB934RO T33 GAC Filter Cartridge
$9.99
Omnipure K2356-JJ K-Series 2 x 6 GAC with 1/4 FQC KDF-55 Inline Filter
$42.99
Omnipure K5655-JJ K-Series 2.5 x 12 1/4 FQC DI Mixbeb Inline Filter
$40.99
Omnipure Q5615 Q-Series 1 Micron Carbon Block with 12 Lead Removal 2.5 Diameter
$39.99
Omnipure Q5515-P Q-Series 1 Micron Carbon Block with 10 Lead and Phosphate 2.5 Diameter
$39.99
Omnipure Q5721-P Q-Series 10 Micron 14 Carbon Block with Phosphate 2.5 Diameter
$44.99
Omnipure E5620-P E-Series 2.5 x 12 1 Micron Carbon Block with Scale Inhibitor and Cystral Reduction
$39.99
Omnipure E5615-P E-Series 2.5 x 12 1 Micron Carbon Block with Scale Inhibitor Lead and Cystral Reduction
$44.99