0 item(s) - Total: $0.00

Omnipure K2585-JJ K-Series 10 1/4 QC Phosphate Scale Inhibitor Inline Filter

Omnipure K2585-JJ K-Series 10 1/4 QC Phosphate Scale Inhibitor Inline Filter

Item SKU: K2585-JJ

MFG ID: K2585-JJ | UPC:


Read Customer Reviews




The Omnipure K2585-JJ K-Series 10 1/4 QC Phosphate Scale Inhibitor Inline Filter delivers the best possible combination of meaningful innovation and useful features. Its cap and body are spin-welded together producing a smooth, consistent seal without the use of glues or binders that can cause contamination.

General Installation/Operation/Maintenance Requirement:

  • Note flow direction of filter.
  • For quick connect fittings, push scratch free tube end into the fitting until it bottoms. Threaded fittings must be wrapped with Teflon tape before installation. Install Teflon taped fittings and tighten firm. Use two wrenches to firmly tighten tubing.
  • Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
  • Replace cartridge when rated capacity (6 months) is reached, or when flow becomes too slow.
  • Install in compliance with state and local laws and regulations.

Specifications:

  • Capacity: 6 Months
  • Flow Rate: 0.50 GPM (1.9 LPM)
  • Maximum Pressure: 125 PSIG
  • Temperature: 35-100_ F (2-38_ C)

Question & Answers

Q Why did you choose this?
Related Products, Parts & Accessories
Omnipure K5553-JJ K-Series 2.5 x 10 1/4 FQC Nitrate Cartridge Inline Filter
$44.99
Omnipure Q5785 Q-Series 14 Phosphate 2.5 Diameter
$49.99
Omnipure E5715 E-Series 2.5 x 14 1 Micron Carbon Block with Lead and Cystral Reduction
$51.99
Omnipure E5721-P E-Series 10 2.5 x 14 Micron Carbon Block with Phosphate Scale Inhibitor
$48.99
Omnipure ELF 1M-KDF ELF-Series 4 x 12.5 1 Micron Block ELF Filter with KDF
$44.99
Omnipure ELF 1M-P-W ELF-Series 4 x 12.5 1 Micron Carbon Block ELF Filter with Phosphate and Sediment Wrap
$48.99