Its electrodes provide fast temperature response and reduction of air entrapment, for more accurate, stable readings. It delivers you with best possible combination of useful features, meaningful innovation and lasting value.
The Oakton WD-35408-57 ultem conductivity/TDS cell is a two-electrode probe set that measures the electrical conductivity (EC) and Total Dissolved Solids (TDS) of a solution. This probe set is commonly used for chemical analysis in the agricultural, hydroponics, pharmaceutical and biotech industries. The probes feature built-in sensors for ATC and have ultem-body housing and stainless steel rings for chemical resistance. They have BNC connectors, with snap-lock architecture, to provide tight coaxial cable connection and stability. The electrodes provide fast temperature response and reduction of air entrapment, for more accurate, stable readings. They have a cell constant (K) =1.0, ideal for mid-range conductivity measurements.
The probe set features a 10-foot cable, and each probe has a three-band platinum sensor. They have probe style C, with amber glass, Na+ interference-reduction, and are for general purpose use. They are to be used at a temperature range of 0 to 80 degrees C. Their dimensions are 3(l) x 3(w) x 7(h) inches, and each weighs 8 ounces. The electrodes have removable, plastic probe guards and are intended for use with the Oakton CON 600, CON 610, PC 650, CD 650, and PCD 650 meters (sold separately).
Conductivity is the ability of a solution or material to conduct an electrical current. TDS measurement identifies materials such as salts, bases or minerals, which contribute to electrical conductivity, within a solution.
Oakton Instruments manufactures an array of scientific instruments for research, industrial, and educational uses. Since 1991, Oakton has distributed a wide variety of instruments such as meters, electrodes, and transmitters. Oakton is based in Vernon Hills, IL, and has facilities in Europe, Asia, and China.