Our Price: $170.99
MSRP $207.47 |
You Save $36.48
The John Guest PE-12-EI-0500F 3/8 inch Polyethylene Tubing 500 ft Roll delivers the best possible combination of meaningful innovation, useful features, and lasting value. It is based on a simple, well-engineered design that minimizes complexity and delivers outstanding performance.
Standard Colours Available:
Other special colours available on request:
Note: This specification refers to LLDPE tubing prefixed PE. Other fittings, valves, tube and ancillary products have their own Technical Specification.
Product Selection and Installation
John Guest fittings and related products are specifically designed and manufactured by John Guest to the Technical Specification set out in the John Guest Product Catalogues. All John Guest fittings and related products should be selected, installed, used and maintained in accordance with these Technical Specifications. It is the customer's/user's responsibility to ensure that John Guest fittings and related products are suitable for their intended applications, are properly installed and maintained and are used in accordance with the Technical Specifications. It is also the customer's/user's responsibility to provide its own customers with all relevant technical information about John Guest products it supplies them. If you have any questions about our technical specifications, please contact us.
For use with chemicals or other potentially aggressive liquids, please refer to our Customer Services Department.
Super Speedfit fittings and related products are not recommended for use with explosive gases, petroleum spirits, and other fuels or for central heating systems.
1 Bar = 14.5 psi (approx.)
Maximum Working Temperature 150°F at pressures shown in the chart above. For temperatures above 150°F customers should refer to our Technical Help Desk.
Please note maximum pressure rating for a 'system' depends on the lowest rated component, e.g. most John Guest fittings have a different rating than the tube ratings shown above.
Burst pressures are approximately 3 times the maximum working pressure.
LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air / pneumatic systems.
All these fittings are produced in Food and Drug Administration (FDA) compliant materials and are therefore recommended for food quality applications.
For use of with chemicals or potentially aggressive liquids, please refer to our Technical Service Department.
NOTE: When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with tubing and fittings.
If the tube is used in a warm water system a tube insert is necessary.
Exposure to Ultrviolet Light
John Guest Black LLDPE tubing is UV stablised and can be exposed to direct ultraviolet light (e.g. direct sunlight); other colours of John Guest LLDPE tubing are not UV stabilised and cannot be exposed to direct ultraviolet light.
Potable Water Applications
John Guest Ltd LLDPE tubing is suitable for potable cold water applications with a maximum chlorine content of 4 parts per million (4ppm). Heated water above 70°F and/or pressures above the maximum will significantly reduce its service life. Direct exposure to sunlight will also significantly reduce its useful service. As part of good practice, tubing should be inspected regularly. If there is any evidence of damage, hardening or cracking it should be replaced immediately.
Note: Hot and cold water plumbing systems must comply with local plumbing code for pipe and fittings.
John Guest LLDPE tube is suitable for pneumatic applications providing pressure is maximum 10 bar @ 20°C (150psi @ 70°F). At elevated temperatures (50°C+) mineral oil will degrade LLDPE tube and, therefore, LLDPE tube used in pneumatic circuits should be periodically checked and replaced if necessary.
Whilst we give a warranty against defects in manufacture or materials, it is the responsibility of the specifier to ensure that fittings and related products are suitable for their application. The installation must be carried out correctly in accordance with our recommendations, complying with recognised codes of practice and relevant national standards, and be properly maintained. Please refer to our terms and conditions of sale.
Hours of Operation (CST): 8:00am - 4:30pm Mon-Thur & 8:00am - 3:30pm Fri
Contact us if you need help finding your water filter system or replacement water filters.
Product Index | Category Index | Brand Index