GE 1206761 Desal AG-Series Tap Water/Brackish RO Element AG4040FF 4" x 40" 2300 GPD TFC Fiber
The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. These elements allow moderate energy savings, and are considered a standard in the industry. AG4040FF High Rejection Brackish Water elements feature a FRP outerwrap and 27 mil feed spacers. This element is designed with male end connections.
Specifications:
- Model: AG4040FF
- Flow: 2,300 GPD
- Active Area: 85 ft2
- Avg. Rejection: 99.5%
- Min. Rejection: 99%
- Part Number: 1206761
Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77F (25C), 15% recovery, pH 7.5 after 24 hours. Individual flux may vary +25%/ -15%.
Operating and Design Parameters:
- Membrane: Thin Film Membrane (TFM)
- Typical Operating Pressure: 200 psig
- Maximum Pressure: 600 psig
- Maximum Temperature: 122F
- Chlorine Tolerance: 1,000 ppm-hrs, dechlorination recommended
- Optimum Rejection pH: 7.0 -7.5
- Operating pH Range: 4.0 - 11.0
- Cleaning pH Range: 2.0 - 11.5
- Maximum Pressure Drop: 10 psig (69 kPa) per element, 50 psig (345 kPa) per vessel
- Feed NTU: <1
- Feed SDI: <3
- Typical Operating Flux: 10-20 GFD (15-35) L.H-1.M-2
