Our Price: $29.99
MSRP $34.99 |
You Save $5.00
Flow-Max FM-5-20 Standard 20 inch × 2 3/4 inch 5 µ Synthetic Filter Media Pleated Sediment Cartridge
Flow-Max filter cartridges outperform wound, spun, melt blown, resin bonded and other ”depth” type filter elements because our cartridges are pleated to provide increased surface area and longer life. Lower pressure drop is another significant advantage, using Flow-Max pleated cartridges, which allows for increased flow rates and the use of smaller filter housings to reduce capital equipment costs. Further savings are provided because our 100% synthetic filter media is cleanable, five micron and up, to lower cartridge replacement costs.
Flow-Max filter cartridges outperform other pleated elements because our high performance filter media is systematically produced using 100% synthetic fibers, with no binders or additives to leave a residue, foam or contaminate. Our filter media is dramatically thicker than other products. For this reason, Flow-Max cartridges provide “depth” filtration for greater sediment removal, along with more surface area with our pleated design.
Features:Filter media is pleated for greater surface area. Synthetic filter media is cellulose-free. “Thicker” filter media has a greater capacity to capture and retain particles, compared to thin, more rigid media types, which have less void space for particle retention. Long lengths have netting to hold pleats in place.All cartridge types and lengths are wrapped.
Benefits:Low pressure drop; long life; reduced filtration costs, compared to wound and spun cartridges. No additives or binders, which may cause foaming.Increased dirt holding capacity; longer life; fewer cartridge replacements needed; and reduced filtration costs, compared to other pleated cartridge suppliers. Increased particle removal efficiency; longer life; and reduced cost per gallon filtered. Superior performance and appearance.Provides security at no additional cost.
Lower pressure drop for higher flow rates:Flow-Max cartridges are pleated, so initial pressure drop is significantly less compared to depth cartridges, such a wound, spun, melt blown and resin bonded. As a result, higher flow rates are possible, reducing filter housing size requirements to lower capital equipment costs.
Washable & reusable:Flow-Max cartridges are washable and reusable, five micron and up to reduce filtration costs. For best results, direct spray into pleats to dislodge sediment. Or, let dry and brush off filter cake from surface of the media.
Hours of Operation (CST): 8:00am - 4:30pm Mon-Thur & 8:00am - 3:30pm Fri
Contact us if you need help finding your water filter system or replacement water filters.
Product Index | Category Index | Brand Index