Everpure H300 replaces EV927071 and EV9270-72 Water Filter

Reduces Volatile Organic Chemicals and 99% of lead. Exclusive precoat design reduces up to 99.99% of particles 1/2 micron and larger in size including Cyptosporidium. Reduces asbestos fibers, dirt, chloramine, chlorine taste and odor, mold and algae.
Scale inhibitor blended into the Micro-Pure material reduces mineral build-up in water using appliances.
Replacing the cartridge is sanitary and as easy as changing a light bulb.
Certifications: NSF 42, NSF 53

Replace the Everpure H-300 cartridge (EV9270-72 or EV9270-71) yearly to reduce the following contaminants:

Lead to below the Federal Action Level of 15 ppb
Cysts such as Giardia lamblia, Entamoeba histolytica and Cryptosporidium parvum
Volatile Organic Chemicals (VOCs), including THMs

The H-300 cartridge features:

A bacteriostat agent to combat the growth and reproduction of bacteria within the cartridge to prevent premature clogging
A 1/2 gallon per minute flow rate
A 300-gallon capacity

( Click Here for Detailed PDF )

Replacement Filter Cartridge EV927071 for H300 system
Replacement part for the Everpure QC4-BH system

Finely polishes treated water to premium quality for drinking and cooking.
The Everpure H-300 Reduces chlorine taste and odor and chloramines.
The Everpure H-300 Reduces dirt, rust, asbestos fibers and other particulates such as oxidized iron, manganese and sulfides.
Reduces parasitic protozoan cysts such as Giardia, Entamoeba, Cryptosporidium.
Controls even extreme levels of common tastes and odors, including those which are earthy, moldy and fishy.
The Everpure H-300 Reduces lead to below the Federal Action Level of 10 ppb.
The Everpure H-300 Effectively reduces Volatile Organic Chemicals (VOCs), including Trihalomethanes (THMs).
KDF Media reduces limescale build-up in water-using appliances as tested by KDF Fluid Treatment, Inc.
KDF Media provides bacteriostatic control as tested by KDF Fluid Treatment, Inc.
Health Claim Performance Certified by NSF/ANSI This system has been tested according to NSF/ANSI 42 and 53 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 42 and 53.
Standard 42- Aesthetic Effects Chlorine 2.0 mg 10% >_ 50% 96.8% Chloramine 3.0 mg 10% 0.5 mg/L 95% Particulate, Class I Particles 0.5 - 1
Standard 53-Health Effects, Asbestos, Turbidity, Lead, Chloroform (VOC surrogate chemical)
Tested using flow rate=0.5gpm; pressure=60 psig; pH=7.50.5; temp.=20C 2.5C NTU=Nephelometric Turbidity Units